Props & Prototypes

STEMworks educational model Model prop to be used as part of an educational event on conduction of potatoes and lemons. The model is made from sprayed timber and acrylics and vinyl clad acrylic. We fitted with simple electronics, the lamps and house light up, the car wheels spin when the circuit is complete.

Advertising prop Wire arm model used in advertising. The arm is around 600mm high made from flexible wire to enable the fingers to be manipulated for the effect of it tripping it's intended. We get such a range of enquiries for prop making read a little more here.

Following a successful delivery last year we were asked to produce Henderson Scotts 2017 custom trophies. The award design, a 3d letter H, is taken from the H of their logo. We made a master then mould and cast the replica letters in three different sizes. The 3d letters were painted and varnished with a [...]

A 3D logo for the Barclays ATP World Tour Finals showing their event hashtag.  This prop was part of promotional imagery and also the launch party player photographs.  The logo consists of solid model board, a spray paint finish in the brand colour, and also a felt base. Construction First of all, we etched the [...]

Red Bull approached us to create some custom trophies for their Street Style World Championship at the Roundhouse in London.  We collaborated with their team to produce designs incorporating key features of the accompanying advertising campaign. Construction The design called for a brick as the base but, due to the size, this had to be [...]

Advertising props We make props for advertising photo shoots or videos. Here our built up 3d prop letters were used in an advertising campaign for Walkers. Can you see all three letters? We can produce built up 3d letters like these ones or flat laser cut letters. See more on our prop making here.

We were commissioned to produce a portable Bar by Kate at Asparagasm, which could be taken to events as well as used in their shop in Nailsworth.  The brief was to produce a flat pack-able oak bar with a neon twist.  With the help of Jamie Knight Carpentry we used special cam locks to hold [...]

Joy stick props for a training purposes. The props are casts of a master joy stick which were then spray painted with a mat black spark effect. Multiples can be cast out at a relatively lower cost than producing a one off individual model. Contact us to find out more on casting and prop making.

We were approached with a bizarre brief (even by model making standards!): To produce a multi-layered maze within a 1m x 1m x 1m cube that can be easily disassembled and reassembled for transportation.  Each layer would need to have a different theme, offer a different type of course and use lots of varied materials [...]

We were commissioned to produce 2 bespoke plywood jigsaw props for Horizon Nuclear Energy as part of an interactive display.  They were made using a mix of traditional woodworking techniques and more modern laser cutting.  We are not just a laser cutting service but a fully equipped and skilled model making practice so can combine [...]