Laser Cutting

There are hundreds of acrylics available in clear, coloured, frost, fluorescent, opaque and also transluscent.

• 0.5mm, 1mm, 1.5mm, 2mm high tolerance Hesaglas acrylic.
• 2mm, 3mm, 5mm, 6mm, 8mm and 10mm acrylic.  Not all colours are available in all thicknesses.
• We don’t cut products with PVC in as it gives off corrosive gases.

See more examples of our acrylic laser cutting services in signage and also laser cut letters.

We can laser cut sheets of timber and veneers. The thickness achievable varies depending on the wood density.

• MDF: 2mm to 9mm.
• Birch ply wood: 0.8mm, 1.5mm, 3mm and 4mm.
• Russian Birch ply wood: Laser cut up to 3mm. Fantastic for signage, 6mm material would be cut on the table saw.
• Oak and Mahogany; Up to 3mm.
• Maple, Pear and Walnut veneers; 0.5mm to 1.5mm.
• Timber veneered MDF, up to 6mm. To get the finish of a more expensive timber we can source, or you can provide us with, veneered MDF. This cuts better than solid timber and is also less expensive.

Wood is also a great material for Laser Engraving.

Some laminates are also suitable for laser cutting. Typically a 2 ply material. The engraved surface reveals a high contrasting bottom ply, which is great for signs.

• Thickness: typically 0.8mm, 1.6mm and 3.2mm. Varying with colour choice.
• Range of matt or high gloss colours. Metalic-look range.
• Internal and external signage.

Laser laminate is also a great material for Laser Engraving.

Laser cutting crisp and intricate detail on:

• Business cards / stationary
• Wedding invitations
• Masks
• Architectural models
• …more!

Card and paper cuts quickly and efficiently. It can produce beautiful, intricate embellishments to your designs and artwork while you design your next piece!

See more laser cutting services in laser cut card and paper.

Mylar is a durable polyester film used for stencil making because it has a high tensile strength. It can be washed and re-used therefore increasing it’s life span.

We can cut one off’s or for orders into the 1000’s. We also stock FDA approved, food safe material for food and drink stencils.

Available in micron; 125, 190, 250, 350, 500. The most common thickness is micron 190, see our blog on stencil making for tips.  Find out more about stencil making.

We have a selection of self inking stamps which can be laser engraved with your text and logo for any occasion. In addition we can also make bespoke size stamps with wooden handles.

See our selection of stamps and prices.

Fashion and textiles industry has been calling on our laser cutting for years for precision and intricacy that is hard to achieve any other way. We can cut almost anything however nothing with pvc in it. Leather, cotton, felt, satin, organza and much more…

Contact Us to find out more about our laser cutting service.